617 research outputs found

    Effect of substituting guinea grass with sunflower hulls on production performance and digestion traits in fattening rabbits

    Get PDF
    [EN] The objective of this study was to evaluate the use of sunflower hulls (SH) to substitute guinea grass (GG), traditionally used as a fibre source in the diets of fattening rabbits, on production performance, coefficients of total tract apparent digestibility (CTTAD) of nutrients, gastrointestinal tract development and caecal fermentation. A total of 160 mixed sex Hyla commercial meat rabbits were allocated to 4 experimental groups (40 per treatment) differing in the SH level inclusion in the diet offered to rabbits from 40 to 90 d of age: 0, 30, 60 and 90 g/kg on as-fed basis: SH0, SH30, SH60 and SH90 groups, respectively. Growth performance was recorded from 47 to 90 d of age, CTTAD of nutrients from 86 to 90 d of age, and gastrointestinal tract development, caecal fermentation and carcass traits were determined at 90 d of age. Increasing substitutions of SH in the diet indicated effects on growth performance, as higher feed intake and lower feed efficiency were observed in SH90 compared with SH0 (P-linear<0.05). Moreover, the higher SH substitution diet (SH60 and SH90) increased the relative caecum weight (P-linear<0.05). A linear negative effect of SH inclusion was observed for the digestibility of neutral detergent fibre (CTTAD from 0.294 to 0.232) and acid detergent fibre (CTTAD from 0.182 to 0.136; P-linear<0.05). Dietary SH substitution level had a quadratic effect on the villus height of the duodenum, jejunum and ileum obtained (P-quadratic<0.05), and the highest were observed in the SH60 group. There was a quadratic effect on the pH of caecum content (P-quadratic<0.05), and the lowest was 6.08 in SH30 group. The total volatil fatty acids increased linearly with increasing SH in diets (from 71.11 to 76.98 mmol/L; P-linear<0.05), and when dietary SH increased, the proportion of acetate tended to increase (P-linear<0.05), and the proportions of propionic and butyric were decreased (P-linear<0.05, respectively). Substitution of GG with SH had no effect on carcass characteristics and meat quality. The current work shows that SH can replace up to 60 g/kg in diets for fattening rabbits, with no adverse impact on aspects of production performance or digestion traits.This study was supported by the earmarked fund for Modern Agro-industry Technology Research System (CARS-43-B-1) and Funds of Shandong “Double Tops” Programme.Liu, G.; Sun, C.; Zhao, X.; Liu, H.; Wu, Z.; Li, F. (2018). Effect of substituting guinea grass with sunflower hulls on production performance and digestion traits in fattening rabbits. World Rabbit Science. 26(3):217-225. https://doi.org/10.4995/wrs.2018.9375SWORD21722526

    Possible isotope effect on the resonance peak formation in high-Tc_c cuprates

    Full text link
    Starting from the three-band pdp-d Hubbard Hamiltonian we derive an effective tJt-J model including electron-phonon interaction of quasiparticles with optical phonons. Within the effective Hamiltonian we analyze the influence of electronic correlations and electron-phonon interaction on the dynamical spin susceptibility in layered cuprates. We find a huge isotope effect on the resonance peak in the magnetic spin susceptibility, Imχ(q,ω){Im}\chi({\bf q},\omega), seen by inelastic neutron scattering. It results from both the electron-phonon coupling and the electronic correlation effects taken into account beyond random phase approximation(RPA) scheme. We find at optimal doping the isotope coeffiecient αres0.35\alpha_{res} \approx 0.35 which can be further tested experimentally.Comment: revised version, new figure is added. Phys. Rev. B 69, 0945XX (2004); in pres

    Finding the reconstructions of semiconductor surfaces via a genetic algorithm

    Full text link
    In this article we show that the reconstructions of semiconductor surfaces can be determined using a genetic procedure. Coupled with highly optimized interatomic potentials, the present approach represents an efficient tool for finding and sorting good structural candidates for further electronic structure calculations and comparison with scanning tunnelling microscope (STM) images. We illustrate the method for the case of Si(105), and build a database of structures that includes the previously found low-energy models, as well as a number of novel configurations.Comment: 4 figures, 1 tabl

    Non-destructive testing of composite fibre materials with hyperspectral imaging: evaluative studies in the EU H2020 FibreEUse project.

    Get PDF
    Through capturing spectral data from a wide frequency range along with the spatial information, hyperspectral imaging (HSI) can detect minor differences in terms of temperature, moisture and chemical composition. Therefore, HSI has been successfully applied in various applications, including remote sensing for security and defense, precision agriculture for vegetation and crop monitoring, food/drink, and pharmaceuticals quality control. However, for condition monitoring and damage detection in carbon fibre reinforced polymer (CFRP), the use of HSI is a relatively untouched area, as existing non-destructive testing (NDT) techniques focus mainly on delivering information about physical integrity of structures but not on material composition. To this end, HSI can provide a unique way to tackle this challenge. In this paper, with the use of a near-infrared HSI camera, applications of HSI for the non-destructive inspection of CFRP products are introduced, taking the EU H2020 FibreEUse project as the background. Technical challenges and solutions on three case studies are presented in detail, including adhesive residues detection, surface damage detection and Cobot based automated inspection. Experimental results have fully demonstrated the great potential of HSI and related vision techniques for NDT of CFRP, especially the potential to satisfy the industrial manufacturing environment

    Striped antiferromagnetic order and electronic properties of stoichiometric LiFeAs from first-principles calculations

    Full text link
    We investigate the structural, electronic, and magnetic properties of stoichiometric LiFeAs by using state-of-the-arts first-principles method. We find the magnetic ground-state by comparing the total energies among all the possible magnetic orders. Our calculated internal positions of Li and As are in good agreement with experiment. Our results show that stoichiometric LiFeAs has almost the same striped antiferromagnetic spin order as other FeAs-based parent compounds and tetragonal FeSe do, and the experimental fact that no magnetic phase transition has been observed at finite temperature is attributed to the tiny inter-layer spin coupling

    Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta

    Full text link
    Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector, the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and (7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure

    Direct Measurements of the Branching Fractions for D0Ke+νeD^0 \to K^-e^+\nu_e and D0πe+νeD^0 \to \pi^-e^+\nu_e and Determinations of the Form Factors f+K(0)f_{+}^{K}(0) and f+π(0)f^{\pi}_{+}(0)

    Get PDF
    The absolute branching fractions for the decays D0Ke+νeD^0 \to K^-e ^+\nu_e and D0πe+νeD^0 \to \pi^-e^+\nu_e are determined using 7584±198±3417584\pm 198 \pm 341 singly tagged Dˉ0\bar D^0 sample from the data collected around 3.773 GeV with the BES-II detector at the BEPC. In the system recoiling against the singly tagged Dˉ0\bar D^0 meson, 104.0±10.9104.0\pm 10.9 events for D0Ke+νeD^0 \to K^-e ^+\nu_e and 9.0±3.69.0 \pm 3.6 events for D0πe+νeD^0 \to \pi^-e^+\nu_e decays are observed. Those yield the absolute branching fractions to be BF(D0Ke+νe)=(3.82±0.40±0.27)BF(D^0 \to K^-e^+\nu_e)=(3.82 \pm 0.40\pm 0.27)% and BF(D0πe+νe)=(0.33±0.13±0.03)BF(D^0 \to \pi^-e^+\nu_e)=(0.33 \pm 0.13\pm 0.03)%. The vector form factors are determined to be f+K(0)=0.78±0.04±0.03|f^K_+(0)| = 0.78 \pm 0.04 \pm 0.03 and f+π(0)=0.73±0.14±0.06|f^{\pi}_+(0)| = 0.73 \pm 0.14 \pm 0.06. The ratio of the two form factors is measured to be f+π(0)/f+K(0)=0.93±0.19±0.07|f^{\pi}_+(0)/f^K_+(0)|= 0.93 \pm 0.19 \pm 0.07.Comment: 6 pages, 5 figure

    BESII Detector Simulation

    Full text link
    A Monte Carlo program based on Geant3 has been developed for BESII detector simulation. The organization of the program is outlined, and the digitization procedure for simulating the response of various sub-detectors is described. Comparisons with data show that the performance of the program is generally satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM

    Search for the Lepton Flavor Violation Processes J/ψJ/\psi \to μτ\mu\tau and eτe\tau

    Full text link
    The lepton flavor violation processes J/ψμτJ/\psi \to \mu\tau and eτe\tau are searched for using a sample of 5.8×107\times 10^7 J/ψJ/\psi events collected with the BESII detector. Zero and one candidate events, consistent with the estimated background, are observed in J/ψμτ,τeνˉeντJ/\psi \to \mu\tau, \tau\to e\bar\nu_e\nu_{\tau} and J/ψeτ,τμνˉμντJ/\psi\to e\tau, \tau\to\mu\bar\nu_{\mu}\nu_{\tau} decays, respectively. Upper limits on the branching ratios are determined to be Br(J/ψμτ)<2.0×106Br(J/\psi\to\mu\tau)<2.0 \times 10^{-6} and Br(J/ψeτ)<8.3×106Br(J/\psi \to e\tau) < 8.3 \times10^{-6} at the 90% confidence level (C.L.).Comment: 9 pages, 2 figure

    Study of J/ψωK+KJ/\psi \to \omega K^+K^-

    Get PDF
    New data are presented on J/ψωK+KJ/\psi \to \omega K^+K^- from a sample of 58M J/ψJ/\psi events in the upgraded BES II detector at the BEPC. There is a conspicuous signal for f0(1710)K+Kf_0(1710) \to K^+K^- and a peak at higher mass which may be fitted with f2(2150)KKˉf_2(2150) \to K\bar K. From a combined analysis with ωπ+π\omega \pi ^+ \pi ^- data, the branching ratio BR(f0(1710)ππ)/BR(f0(1710)KKˉ)BR(f_0(1710)\to\pi\pi)/BR(f_0(1710) \to K\bar K) is <0.11< 0.11 at the 95% confidence level.Comment: 11 pages, 5 figures. Submitted to Phys. Lett.
    corecore